Sentinel Pro Thermostatic Pressure Balance Valve With iBox Plus Lever Handle
https://www.ebay.com/itm/142890599156
or
https://www.amazon.com/dp/B07FS6K5MF
https://www.ebay.com/itm/142890599156
or
https://www.amazon.com/dp/B07FS6K5MF
Pressure(PSI)
|
0.725
|
1.45
|
2.175
|
2.9
|
3.625
|
4.35
|
5.075
|
5.8
|
6.525
|
7.25
|
7.975
|
Flowmeter(L/min)
|
11
|
13
|
15
|
17
|
20
|
23
|
24.5
|
26
|
27.5
|
28
|
29.5
|
Pressure:The lower
one of Hot water and cold water pressure.
Hot Water/Cold water Inlet pressure:14.5 PSI~72PSI
Cold Water Inlet Temperature:39~84 degree Fahrenheit
Hot Water Inlet Temperature:113~185degree Fahrenheit
Max Hot Water outlet Temperater: Less than 120degree Fahrenheit
Feature:
MIXING WATER OUT STABLE:
If inlet&outlet Temperature do not change, Just pressure change less than 50%, mixing water temperature will be stable( change less than 4 degree Fahrenheit.)
Ifinlet&outlet Pressure do not change,Just hot water temperature up as 3。F/min until 163 degree Fahrenheit, mixing water temperature will be stable (change less than 4degree Fahrenheit)
DURABLE SFATY:
If cold water break unexpected, mixing water flow rate will reduce and be less than 1.9L/min, mixing water temperature will less than 120 degree Fahrenheit。
If hot water break unexpected, mixing water flow rate will also reduce and be less than 1.9L/min.
Meet standard:
This product is in compliance with the following codes:
Uniform plumbing Code(UPC)
National Plumbing Code of Canada
This product is compliance with the following standards:
ASSE1016-2011/ASME A112.1016-2011/CSA B125.16-11 including Update NO.2,dated Octorber 2013
Skills requirement:
1. When installing the spool, the “H” and “C” marks on the spool should correspond to the markings on the valve body;
2. The tightening torque of the lock nut is not less than 10N.m;
3. The cut-off valve should be screwed to the highest point
1. When installing the spool, the “H” and “C” marks on the spool should correspond to the markings on the valve body;
2. The tightening torque of the lock nut is not less than 10N.m;
3. The cut-off valve should be screwed to the highest point
评论
发表评论